Marantz SR6005 Home Theater System User Manual


 
85
Basic versionSimple version Advanced version
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Information
Surround
n Types of input signals, and corresponding surround modes
This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode.
Symbols in the table
S This indicates the selectable surround mode.
Surround mode (vpage31)
NOTE
Input signal types and formats
ANALOG
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
LINEAR PCM
(multi ch)
LINEAR PCM
(2ch)
DTS-HD
Master
Audio
DTS-HD
High
Resolution
Audio
DTS
EXPRESS
DTS ES
DSCRT
(With Flag)
DTS ES
MTRX
(With Flag)
DTS
(5.1ch)
DTS 96/24
DOLBY
TrueHD
DOLBY
DIGITAL Plus
DOLBY
DIGITAL EX
(With Flag)
DOLBY
DIGITAL EX
(With no
Flag)
DOLBY
DIGITAL
(5.1/5/4ch)
DOLBY
DIGITAL
(2ch)
DTS SURROUND
DTS-HD MSTR
S
DTS-HD HI RES
S
DTS ES DSCRT6.1
z1z4 S
DTS ES MTRX6.1
z1z4 S
DTS SURROUND
S S S
DTS 96/24
S
DTS (–HD) + PLgx MOVIE z2z4 S S S S S S S
DTS (–HD) + PLgx MUSIC z1z4 S S S S S S S
DTS (–HD) + PLgz z3 S S S S S S S
DTS EXPRESS
S
DTS (–HD) + NEO:6
z1z4 S S S S S S
DTS NEO:6 CINEMA
S S S
DTS NEO:6 MUSIC
S S S
DOLBY SURROUND
DOLBY TrueHD
S
DOLBY DIGITAL+
S
DOLBY DIGITAL EX
z1z4 S S S
DOLBY (D+) (HD) +EX
z1z4 S S
DOLBY DIGITAL
S S S
DOLBY (D) (D+) (HD) +PLgx MOVIE z2z4 S S S S S
DOLBY (D) (D+) (HD) +PLgx MUSIC z1z4 S S S S S
DOLBY (D) (D+) (HD) +PLgz z3 S S S S S
DOLBY PRO LOGIC gx MOVIE z1z4 S S S
DOLBY PRO LOGIC gx MUSIC z1z4 S S S
DOLBY PRO LOGIC gx GAME z1z4 S S S
DOLBY PRO LOGIC gz z3 S S S
DOLBY PRO LOGIC g MOVIE S S S
DOLBY PRO LOGIC g MUSIC S S S
DOLBY PRO LOGIC g GAME S S S
DOLBY VIRTUAL SPEAKER
S S S S S S S S S S S S S S S S
DOLBY HEADPHONE
S S S S S S S S S S S S S S S S
z1 If “Speaker Config.“ – “S.Back“ (vpage62) is set to “None”, this surround mode cannot be selected.
z2 If “Speaker Config.“ – “S.Back“ (vpage62) is set to “1spkr” or “None”, this surround mode cannot be selected.
z3 If “Speaker Config.“ – “F. Height“ (vpage62) is set to “None”, this surround mode cannot be selected.
z4 This surround mode can be selected when “Amp Assign” (vpage61) is set to “Normal”.