Filter
Top Products
23
Simple version Advanced version Information
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Basic version
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(vpage24)
n Playing a CD player (vpage24)
n Playing a USB memory device (vpage24)
n Playing an iPod
®
(vpage26)
n Tuning in radio stations (vpage27)
Selecting a listening mode (Surround mode)
(vpage31)
n Selecting the input source (vpage23)
n Adjusting the master volume (vpage24)
n Turning off the sound temporarily (vpage24)
Playback (Advanced operation) (vpage42)
Important information
Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.
Selecting the input source
Press the input source select button
(BD, DVD, VCR, SAT, GAME, AUX1,
NET/USB, TV, CD, SATR, TUNE,
M-XP) twice to play back that source.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Using the “Source Select” menu
q Press AMP and the press SOURCE SEL.
Display the “Source Select” menu.
Source Select :SAT/CBL
Recent Source
Enter
Select
ENTER
The currently selected input
source is highlighted.
q
w
e
q Input Source
The name of the highlighted input source is displayed.
w Recently used sources
The recently used input sources (up to five) are displayed.
e Icons for the input sources in the different categories are
displayed.
w Use uio p to select the input source,
then press ENTER.
The input source is set and the source
selection menu is turned off.
• When using with an iPod connected directly to the USB port of this
unit, select “ (USB/iPod)” for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage66).
• To turn off the source selection menu without selecting an input
source, press SOURCE SEL again.
n Using the button on the remote control unit
Press INPUT df.
• When INPUT df is pressed, the input
source is switched in the order shown
below.
BD DVD VCR SAT AUX1GAME USB/iPod
M-XPort SIRIUS AUX2 CD
TVHD Radio
n Using the knob on the main unit
Turn INPUT SELECTOR.
• Turning INPUT SELECTOR switches
the input source, as shown below.
BD DVD VCR SAT AUX1GAME USB/iPod
M-XPort SIRIUS AUX2 CD
TVHD Radio
Set the front speakers to be used
Press SPKR A/B.
• Each time you press SPKR A/B, the front
speaker setting will change as follows.
Front A Front A+BFront B