46
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Playback
1
Press Z2 to switch the remote
control operating mode.
The remote control unit switches to the
operating mode for ZONE2.
2
Press ON to turn on the ZONE2
power.
The indicator on the display lights.
• When
STANDBY is pressed, ZONE2 turns
off.
• Power in ZONE2 can be turned on or off by
pressing ZONE2 ON/OFF on the main unit.
3
Press INPUT df.
The audio signal of the selected source
is output to ZONE2.
• Turn
INPUT SELECTOR after
pressing ZONE SELECT on the
main unit to select an input
source.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Press STANDBY.
Adjusting the volume
Use VOLUME + – to adjust the volume.
GAdjustable rangeH
– – –
–80dB – –40dB – 18dB
(When the “Volume Display” (vpage66) setting is “Relative”)
GAdjustable rangeH
0 – 41 – 99
(When the “Volume Display” (vpage66) setting is “Absolute”)
• At time of purchase, “Volume Limit” (vpage65) is set to “–10dB
(71)”.
Turn MASTER VOLUME after pressing ZONE SELECT on the main unit
to adjust the sound volume.
Turning off the sound temporarily
Press MUTE.
The sound is reduced to the level set at “Mute Level” (vpage65) in
the menu.
• To cancel, either adjust the volume or press MUTE again.
• The setting is canceled when the zone’s power is turned off.