Marantz SR6005 Home Theater System User Manual


 
37
Basic versionSimple version Information
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Advanced version
For speaker impedance and speaker cable connections, see page 5.
Connect
5.1-channel connection
For 5.1-channel playback, set “Set up “Amp Assign”” (vpage39) to “Normal”.
FL FR
C
SL
SR
SW
Front A/B connection
The second set of front speakers can be connected to the FRONT B/HEIGHT terminals.
In this case, perform the settings using the SPKR A/B button on the remote control (vpage23 “Set the
front speakers to be used”).
FL(A)FL(B) FR(B)FR(A)
SW
For surround playback of a multichannel source, if you connect the center speaker, surround speakers,
surround back speakers and subwoofers, 7.1-channel playback is available.
Front speakers can be used separately, depending on the speaker’s specifications or playback source such
as front speakers (A) for multichannel playback and front speakers (B) for 2-channel playback.
NOTE
When using the A front speakers and B front speakers simultaneously, make sure you check the impedance
of the connected speakers (vpage5).