Filter
Top Products
22 Issue 1 CRCS R6.0 April 1999
Testing CRCS
Establishing the Communications Link
After you have added the MCU, run the link administration program to establish
the connection between the MCU and the CRCS PC.
Figure 18. CRCS Database Setup—Run Link Administration
1. From the Adm
in menu, select Run Link Admin.
2. From the MCU Link Administration window, select the MCU (1 or 2) from
the drop-down menu that you added in "Adding the MCU" to establish the
communications link between that MCU and the CRCS PC.
Figure 19. CRCS Database Setup—MCU Status Link Administration