Filter
Top Products
6 Issue 1 CRCS R6.0 April 1999
Pre-Installation Requirements
Remote Configurations
For remote configurations where the MCU and CRCS/OpCenter or OpCenter SP
are not collocated, modem pooling is used (see "Appendix A: Modem Pooling" on
page 44). The modems must support a minimum of 9600 baud. Additional serial
ports may be required which must support non-shared interrupts.
Login and Passwords
Be sure you know the following information:
Login, password, dialed number and COM port for each MCU
CRCS or OpCenterSP Serial Number
Default administrator password and agent password
PC login and password, if applicable
Fax Option
Refer to "Faxmodem Installation" on page 32 for hardware and software require-
ments for the optional fax feature.