Linksys WMLS11B Speaker System User Manual


 
32
Chapter 6: Using the LCD Menus of the Wireless-B Media Link for Music
Network Setup Menu
Wireless-B Media Link for Music
Change to wired
If you want to use the Media Link as part of your wired network, select Change to wired. When asked if you are
sure, select Yes to continue, or select No to cancel the setup. Press the right arrow button to save your new
setting. Press the left arrow button to cancel your change.
Device Name
If you want to change the Media Link’s Device Name, select Device Name. Use the arrow keys to scroll through
the uppercase alphabet, lowercase alphabet, numbers, and punctuation. To make a selection, press the Select
button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.
Wireless
To change the Media Link’s wireless settings, select Wireless. You have four choices: SSID, Network Type,
Encryption, and Site Survey.
SSID
The Media Link’s default SSID is any. If you want to change its default SSID, select SSID. Use the arrow keys to
scroll through the uppercase alphabet, lowercase alphabet, numbers, and punctuation. To make a selection,
press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to
cancel your change.
Figure 6-18: Device Name Screen
Figure 6-19: Wireless Screen
Figure 6-20: SSID Screen
NOTE: Every time you want to save a new setting, you must press the right arrow button on the
remote or front panel. Then the Media Link will save the setting and restart itself.