Filter
Top Products
INSTALLING THE A(;RYLIC COVER ONTO THE KPS 25s continued
PUBH-PULL P’N
~
(
)
The "lop o] the KPS 25s with Acrylic Cover and Flex-Foil Cable in Piece
A
PUSH-PULL PIN
B PIN IN ACRYLIC COVER
C NOTCH IN TOP COVER
D FLEX-FOIL CABLE
E FLEX-FOIL RECEPTACLE
5.
Push the push-pull pins (A) into the
closed position.
6. Make sure the flex-foil receptacle is in
the open position. Feed the flex-foil
cable (D) attached to the Acrylic Cover
back toward the flex-foil receptacle (E)
on the top of the KPS 25s. Carefully
align the flex-foil cable so the tip of ~the
flex-foil cable is parallel to the flex-foil
receptacle.
7. Insert the flex-foil cable into the flex-foil
receptacle (E). Close the flex-foil recep-
tacle by sliding the flex-foil receptacle
sleeve toward the transport. There will
be an audible "click" when the flex-foil
cable is locked in position.
KRELL
®
KPS 25s English Page 7 of 20