Filter
Top Products
II
Section 2
Special Play Functions
Repeat
Press once to repeat the entire disc or track
program continuously. Press twice to repeat
the current track continuously. Press a third
time to cancel this function. When selecting
the desired Repeat function, press the
Repeat button once and REPEAT will
appear in the Compact Disc Transport
Display Window. Press the Repeat button
twice and REPEAT and SINGLE will appear
in the Compact Disc Transport Display
Window.
AJB
Creates a loop between two pre-determined
points within a single track or sequential
tracks. To create an A/B loop, start the play
of a track. When you hear the part that you
want as the beginning of the loop, press A/B
to insert the start position. Press NB again
to insert the finish position. A/B will auto-
matically begin and continue indefinitely.
Press Stop or A/B again to delete the A/B
program.
Access
When an exact start positions is critical, use
the Access button to numerically select a
position within a specific track program:
Track Programming
Track programming gives you the ability to
select the tracks you want to hear, in the
order in which you want to hear them. This
method of programming is short term and
will be cleared when you press the Stop
button twice. A maximum of twenty tracks
may be stored in a program sequence.
NOTE: Track Forward, Track Back, Repeat,
and Pause function normally within a pro-
grammed sequence.
Prog
Press once to access the track program-
ming mode.
How to Write a Program
1. Press Program on the KPS 25s remote
control. PROGRAM will appear in the
Compact Disc Transport Display
Window.
2. Key in the desired track sequence using
the numeric keypad. Tracks consisting
of two digits must be keyed within
eight seconds of each other. The num-
ber of tracks and total playing time of
the programmed sequence will appear
in the Compact Disc Transport Display
Window. Track numbers will appear in
the Compact Disc Transport Display
Window in the order in which they are
stored within a programmed sequence.
3.
Press Play to begin playback of a pro-
grammed sequence.
4. Press the Stop button twice to erase a
programmed sequence.
Section 3
Digital Inputs
The KPS 25s has six digital inputs: CD,
AES, OPTICS 1, OPTICS 2, COAX 1, and
COAX 2. Press the appropriate button to
select the input that supports your source.
Section 4
Track Functions
Pause
Press once to temporarily suspends playing
the current track. Press the Pause or Play
button to resume playing the track at the
point Pause was engaged.
Page 12 of 20 English
KRELL
®
KPS 25s