Filter
Top Products
Placement
WARNINGS
The Krell Playback System
TM
must not be
located where it could be exposed to drip-
ping or splashing fluids.
Before you install the KPS 25s into your
system, review the following guidelines to
choose the location for the KPS 25s. This
will facilitate a clean, trouble-free installation.
The KPS 25s does not require a special rack
or cabinet for installation. Forthe dimensions
of the KPS 25s see Specifications on page
20.
1. Place the KPS 25s on a firm level sur-
face, away from excessive heat, humi-
dity or moisture.
2. The KPS 25s incorporates an advan-
ced suspension system and does not
require additional mass coupling or iso-
lation. You may experiment with feet
or cones as long as they are not perma-
nently affixed to the chassis. Any unau-
thorized modifications to the electronics
or chassis will void the warranty.
IMPORTANT: Please do not attach
enhancement accessories such as rings,
mats, or dampers to individual CDs. These
accessories may cause problems with the
transport mechanism, resulting in erratic
playback and/or poor sound.
AC Power Guidelines
WARNING
Do not remove or bypass the ground pin on
the end of the AC cord. This may cause RFI
(radio frequency interference) to be induced
into your playback system.
The KPS 25s has superb regulation and
does not require a dedicated AC circuit.
Avoid connections through extension cords
or multiple AC adapters. High quality 15 amp
grounded AC stdps are acceptable. High
quality AC line conditioners or filters can be
used if they are grounded and meet or
exceed the unit’s power supply rating of 100
VA.
Installing the Acrylic
Cover
Install the Acrylic Cover onto the top of the
KPS 25s, before connecting the KPS 25s to
your system. Follow the easy steps outlined
on pages 5, 6, and 7.
Page 4 of 20 English
KRELL
®
KPS 25s