Filter
Top Products
@
430 MHz ANT
connectorpI
7
@
CW KEY jack
0
144 MHz ANT
connector-
-
@
SP jack
-
@
AUX socket
-
@
Power connector
-
@
GND terminal
OH
eat sink
-
rier level) control
FM.MIC control
ery case for backup
ONE (Side tonel
@
ANTI-V (ANTI VOX)
10
DELAY (DELAY TIME) control
@VOX-G (VOX GAIN) control
@
UP-DOWN Switch
@PTT Switch
6 AUX socket
This connector is used for controlling a linear amplifier,
7 Back-up Battery Case
etc., or for external standby. For connection, use the sup-
Load battery into the case to back-up memory channels.
plied 7P plug (DIN
type).
Battery will last for about 1 year.
7
Power Connector (AC and DC)
For connection of the supplied AC power cord or the
specified DC power cord (DC 13.8 V).
8 GND (earth) Terminal
For connection of an earth lead.
u
@
Fuse holder
9 Fuse Holder
A 2A fuse. When it blows, check the
Cause
and replace
with the spare supplied.
3-3. INTERNAL VIEW
1
CAR. L (Carrier Level) Control
This control adjusts the carrier level in CW mode. lt does
not function in other modes. Use the control within
the
ALC zone.
2 FM-MIC Control
This control adjusts the sensitivity of the microphone dur-
ing FM transmission.
3 SIDE TONE Control
This control adjusts the monitoring level of side tone during
CW Operation.
4 VOX-G Control
This control adjusts the sensitivity of the VOX controlled
Operation.
5 DELAY (Delay Time) Control
This control adjusts the VOX time constant. Adjust it
according to the
Speed
of Speech.
6 ANTI-V (ANTI VOX) Control
This control is used to adjust the VOX System so that it is
not tripped by Sound from the speaker.
3-4 MICROPHONE
1
PTT Switch
Press-to-talk switch for transmission.
2 UP-DOWN Switch
This switch is used to shift the VFO frequency up or down.
8