Kenwood TH-K4AT Stereo System User Manual


 
64
CALL SCAN
You can alternate between monitoring the Call Channel
and the current operating frequency.
1 Select the frequency (in VFO or Memory Recall
Mode) you want to monitor.
In VFO Mode, turn the Tuning control to select the
desired frequency.
In Memory Recall Mode, turn the Tuning control to
select the memory channel you want to monitor.
2 Press [CALL] (1 s) to start the Call Scan.
3 The Call Channel and the selected VFO frequency or
memory channel are monitored.
4 To stop Call Scan, press [PTT] or [CALL].
Note:
You must configure the CALL key function to “CALL” (Menu No.
18) prior to using Call Scan. Otherwise, a 1750 Hz tone will be
transmitted.
The transceiver stops scanning when it detects a signal.
You can perform Call Scan even if the recalled memory channel
has been locked out {page 67}.