Filter
Top Products
50
MEMORY CHANNEL TRANSFER
Memory \ VFO Transfer
After retrieving frequencies and associated data from
Memory Recall Mode, you can copy the data to the
VFO. This function is useful, for example, when the
frequency you want to monitor is near the frequency
stored in a memory channel.
1 Press [MR], then turn the Tuning control to recall a
desired memory channel.
2 Press [F], [VFO] to copy the memory channel data
to the VFO.
Note:
◆ To copy an odd-split channel data {page 45}, turn the Reverse
function ON {page 38} before performing the transfer.
◆ You can also transfer the Program Scan memory channels (L0/U0
~ L2/U2), the Priority Channel (Pr) and Weather Alert (AL)
frequency (TH-K2AT K/ K2 only) to the VFO.
Channel \ Channel Transfer
You can copy channel information from one memory
channel to another. This function is useful when storing
frequencies and associated data that you temporarily
change in Memory Recall Mode.
1 Press [MR], then turn the Tuning control to recall a
desired memory channel.
2 Press [F], [MR].