Kenwood TH-K4AT Stereo System User Manual


 
98
If the transmission does not begin, you must
readjust the VOX Gain so that transeiver
transmits while you are speaking. To readjust the
gain, press and hold [PTT] then turn the Tuning
control to select a more sensitive gain level.
While readjusting the gain, you can release
[PTT]. The transceiver will remain in Adjustment
Mode for approximately 5 seconds.
3 Adjust the VOX Gain by turning the Tuning control
until the transceiver reliably switches to transmission
mode each time you speak while the transceiver is
transmitting.
From the Menu:
1 Continue from step 1 and 2 from VOX (Voice-
Operated Trasmission) on page 97.
2 Press [MENU] to store the VOX Gain level.
“VOX” appears on the bottom right of the display when
the VOX function is ON.
3 Press any key other than [LAMP], [MONI/SQL] and
[MENU] to exit Menu Mode.
4 Adjust the VOX Gain, performing steps 1 to 3 until
the transceiver reliably switches between
transmission and reception each time you speak.
The setting should not allow background noise to
switch the transceiver to Transmission Mode.