Kenwood TH-K4AT Stereo System User Manual


 
11
A high pitched double beep sounds and a Power-ON
message appears momentarily. The various indicators
and the current operating frequency appear on the LCD.
The transceiver stores the current parameters when it
is turned OFF and automatically recalls these
parameters the next time you turn the transceiver ON.
2 Turn the VOL control clockwise, to the 11 o’clock
position.
3 Turn the Tuning control to select a reception
frequency.
V
O
L
E
N
C
.
You may further turn the VOL control to adjust the
volume level of the signal.
4 To transmit, hold the transceiver approximately 5 cm
(2 inches) from your mouth.
5 Press and hold [PTT], then speak in your normal
tone of voice.
6 Release [PTT] to receive.
7 Repeat steps 4, 5 and 6 to continue communication.