Filter
Top Products
58
While in Channel Display Mode, only the following keys
can be operated.
[KEY]
TTPPMALLQS/INOMF#
1
RMLLAC gninuT lortnoc
1
TH-K2AT/ ET/ K4AT only
[F] then
TTPPMAL
1
LQS/INOMUNEMF
1
The light stays ON until [F], [LAMP] is pressed again {page 88}.
[KEY] (1 s)
FRMLLAC
While transmitting:
PMALUNEMLLAC
1
gninuT lortnoc
2
1
1750 Hz tone is transmitted (TH-K2E/ K4E) {page 36}. DTMF D tone
is transmitted (TH-K2AT/ ET/ K4AT) {page 76}.
2
DTMF keypad, [0] ~ [9], [ ], [#], and [F] (A tone) ~ [CALL] (D tone)
also works (TH-K2AT/ ET/ K4AT only) {page 76}.
To recover normal operation, turn the transceiver OFF
and press [PTT]+[MR]+[ ] (POWER) again.
Note:
◆ To enter the Channel Display Mode, you must have at least one
memory channel that contains the data.
◆ If the memory channel contains the Memory name data, the
Memory name is displayed in place of the “CH” characters.