Kenwood TH-K4AT Stereo System User Manual


 
63
To perform Program Scan, the “L” channel must be lower
than the “U” channel. Otherwise, Band Scan starts {page
60}.
MEMORY SCAN
Memory Scan monitors memory channels in which you
have stored frequencies.
All-Channel Scan
The transceiver scans all of the memory channels in
which you have stored frequencies.
1 Press [MR] (1 s).
Scan starts from the last memory channel number and
ascends up through the channel numbers (default).
Turn the Tuning control to change the scanning
direction.
2 To stop All-Channel Scan, press [MR] or [PTT].
Note:
You must have 2 or more memory channels that contain data,
excluding special function memory channels (L0/U0 ~ L2/U2, Pr,
and AL).
You can perform All-Channel Scan in Channel Display Mode
{page 57}.