Kenwood KRF-X7775D Stereo Receiver User Manual


 
59
Button Layout
Chapter Three: Button Layout in
Controlling Other Devices
The remote control unit provided with the receiver can also control a
variety of AV devices. As the functions of the buttons are variable depend-
ing on the controlled device, it is recommended to control each device by
referring to a function chart. The following three kinds of buttons are
used to control their respective functions.
1. Remote control buttons
The buttons which are operated in the same way as ordinary remote
control are referred to as remote control buttons.
1 Select the device to be controlled by pressing the MUSIC button,
MOVIE button or TV button.
2 Press the button corresponding to the desired operation.
2. Display buttons
Pressing the LCD function buttons (
, ) and LCD cursor up/
down buttons (
/ ) displays a menu for use in control.
1 Select the device to be controlled by pressing the MUSIC button,
MOVIE button or TV button.
2 Press the Menu button (LCD function button 2) to display the
control menu.
3 Select the controlled item by pressing the LCD cursor up/down
button (
/ ) then press the LCD function button 2 ( ) to
set the selection.
3. F.SHIFT button
In addition to the functions displayed on remote control buttons, the
functions displayed in blue characters on the panel above the buttons
can also be used. To use one of them, press the F.SHIFT button then
press the desired button within 8 seconds.
(Example) To use the REPEAT function: Press the F.SHIFT button then
press the 1(REPEAT) button.
1. Although the remote control unit provided with the receiver has been
designed to be used in remote control of multiple devices, there may
be certain devices which cannot be remote controlled by it.
2. Certain devices may function differently from the intended function.