Filter
Top Products
35
Using Receiver
How Do I Adjust the Surround Modes?
1 Tuner (frequency display)
2 CD1
3 MD/TAPE1
4 CD-R
5 VIDEO1
6 VIDEO2
7 VIDEO3
8 DVD
9 AV AUX
0 PHONO
¤ INPUT SELECTOR ‹
TV button
TV
1 TV1
2 TV2
3 CABLE
The TV button
cannot select the
input.
It can be used to
remote control TV1,
TV2 or CABLE if ,
devices are
identified at these
inputs.
Video device
MOVIE
1 VIDEO1
2 VIDEO2
3 VIDEO3
( 4 VIDEO4)
5 DVD
6 AV AUX
If any of the above
inputs is not
identified, the next
device name will be
displayed.
Audio device
MUSIC
1 CD1
2 MD/TAPE1
3 Tuner
4 CD-R
5 PHONO
If any of the above
inputs is not
identified, the next
device name will be
displayed.
Selecting the Inputs
To select an input on the receiver:
Press one of the INPUT SELECTOR (¤/‹) buttons. Each press changes
the input in the following order.
Although VIDEO4 is displayed in the initial status, the receiver cannot
be switched to select VIDEO4. The VIDEO4 display will not appear after
Remote Control unit has been set up.
To select an input on Remote Control unit:
The TV-monitored device, video device and audio device can be selected
using separate buttons.
To return to the previously dis-
played input, press the other
button.
Selecting the Inputs