Filter
Top Products
49
Using Receiver
How Do I Operate Devices?
Recording
To record audio/video:
1. Select the recording input source device such as a AV device or tuner
(see page 35).
2. Use Remote Control unit to select the channel and perform other
required operations in the same way as with the remote of the se-
lected AV device.
3. Press and hold the remote’s CONFIRM/SHIFT button for about 2
seconds so that the Shift display appears, then select the recording
device such as the VCR. For 8 seconds after the CONFIRM/SHIFT but-
ton is pressed, the input selection signal is not transmitted from the
remote to the receiver even when an input is selected. Therefore, this
period can be used to remote control the recording device without
changing the input selection.
4. Press the remote’s REC button to start recording.
For detailed operating procedures of your AV device, refer to its instruc-
tion manual.
To record a source connected through [SL 16] system control cord:
When recording audio from a CD player connected through a system
control cord, the sync recording is available. (For the sync or synchro
recording, refer to the instruction manual of your cassette deck or MD
recorder.)
1. Select the CD input on Remote Control unit.
2. Put the cassette deck or MD recorder in Rec pause mode. When the
CD starts to be played, recording is automatically started in synchro-
nism.