Kenwood KRF-VBB81 D Stereo Receiver User Manual


 
Use the operating procedure on this page to store RDS
stations automatically in preset memory. Up to 40 RDS
stations can be preset and received with a simple key
operation.
This unit is compatible with the RDS so it can use convenient
RDS functions including automatic tuning.
VR-2ogO/VR-2OBO/KRF-V8881 DiKRF-V77710 [EniK)
RDS stations should be stored in the preset memory follow-
ing the procedure in "Storing RDS stations automatically in
preset memory" before listening to RDS stations.
The following procedure allows to select stations broadcasting RDS broadcast and store them in the preset memory (up to 40
stations can be preset).
r_ select the "Tuner" input.
0 Select the "Toner" icon,
The last tuned frequency is d splayed.
Perform selection in the "Tuner" menu screen.
O Set the receiving band to "FM",
The band is alternated every time "Band" is selected,
FM _ AM
Let the FM indicator on the main unit light,
I_ Select the "Memory/10 key Pad" icon,
D Preset stations by performing the Auto Memory operation.
Auto Memo
O Select the "Auto Memory" icon.
In a few minutes, the statLons with which RDS broadcast is
received are stored in order beginning from preset channels "01"
{up to 40 stations can be preset).
When the number of stations prey ding RDS broadcasting is less
than 40, some of other FM stations wifl be preset in the vacant
channels
During the "Auto Memory" operation, the corresponding indica-
tor on the main umt blinks.
If stations have already been stored in prese_ channels, the same
number of these preset channels as the number of stations are
cteared and reptaced with the data of the newiy preset stations
station
Auto Memor
O It can also be selected by "P.CalI",
Select "(_"or "(_" of'P,Call",
_l It can also be selected using numeric keys,
To specify the preset number (up to 40) of the desired station:
Select numeric icons as follows..,
To receive in "15" ,..., [_] []
To receive in "20" .,... F_ (_ [_]
If you make a mistake in entering the figure of 10, select the
_con repeatedly unti! the original d splay is shown, then enter the
correct number.