Filter
Top Products
Using Receiver
64
How Do I Adjust PowerTouch’s Display?
Using PowerTouch to Dim or Brighten the Receiver’s Front Panel
1. Touch
(Sepup) on the Quick Access menu.
2. Touch to make the receiver display illumination dim and less
noticeable. It is also possible to disable some indicators (DTS, 96 kfs,
HDCD, DOLBY DIGITAL, MPEG and D.R.I.V.E.) on the receiver. Each
touch of the FL Dimmer button switches the above as shown below.
1 Display/bright Indicators/enabled
2 Display/dim Indicators/enabled
3 Display/dim Indicators/disabled
Changing the Front Panel Display Mode
1. Touch
(Sepup) on the Quick Access menu :
2. Touch
.
A: Connected Device Input Type
DVD : AUTO
B: Input Terminal Connected Device
VIDEO4 : DVD
C: Listen Mode
DOLBY DIGITAL
"Input Type" is displayed only when a selector with digital input is se-
lected.
When the input mode is PHONO, TUNER or AV AUX, the connected
device and listen mode are displayed alternately.