Kenwood VR-4900 Stereo System User Manual


 
103
Troubleshooting
Receiver/Tuner
I can’t receive a radio station
Check that:
The appropriate antenna is connected. See Chapter One of the Con-
nections and Setup Guide.
The broadcast band is correct. See “Tuner” on page␣ 52 of this manual.
The tuner is set to the correct frequency. See “Tuner” on page␣ 52 of
this manual.
I’m getting a lot of static/interference
Check whether the receiver or antenna is too close to a TV or other
electrical appliance.
Adjust the antenna for best reception.
If you live in an area with weak FM signals, consider a rooftop or an
amplified FM antenna (available at any home electronics store).
When I press a key to tune to a preset station, the receiver does not
respond
Check whether:
The receiver has been unplugged for more than three days. If it has,
your settings were cleared from the receiver’s memory. See “My re-
ceiver won’t turn on and the STANDBY indicator is flashing” on
page␣ 99 of this manual.
The Tuner input is selected. See “Tuner” on page␣ 52 of this manual.