Filter
Top Products
Convenient recording methods
34
EN
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
Make preparation for recording.
Be sure to put the cassette deck in stop mode.
1 Perform steps 1 to 3 of the procedure in "Recording on TAPE". §~¶
2 Ensure that the "PGM" and "RDM" indicators are not lit.
3 Insert disc in the CD player.
1
÷ If the "PGM" indicator is lit, turn it off by pressing the PGM key in stop mode to cancel the program mode.
÷ If the "RDM" indicator is lit, turn it off by pressing the RANDOM key in stop mode to cancel the random play mode.
Check the current play mode of the CD player.
2
Select the desired CD track and play it.If it is in play mode, stop it.
All-track recording Single-track recording
÷ When step 3 is performed in the middle of CD play-
back, the current track will be recorded from the begin-
ning.
Start recording.
3
÷ When either playback or recording stops, the other op-
eration is stopped automatically.
(To record other tracks, repeat steps 2 and 3 for each
track)
To interrupt a recording
(Recording and playback will be stopped)
At the end of the recording
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec.
has been produced.
If you are operating the remote, the same effect
as step 3 can be obtained by simply pressing the
O.T.E. key to start recording.
One-touch edit recording
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) and
Metal (Type
) tapes.
=TAPE)( CD-DA
VIDEO CD (with PBC OFF *)
5281/33-35/EN 6/19/02, 11:45 PM34