Filter
Top Products
Various CD (CD-DA, VIDEO CD and MP3 file) playback features
29
EN
Select "PGM" mode.
Select track numbers in the order you want to play them.
Start playback.
Select the CD input.
÷ Up to 32 tracks can be programed. When "PGM FULL"
is displayed, no more tracks can be programed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
1 Select the track.
2 Confirm the selection.
(Go to step 2 within 20 seconds.)
Press the numeric keys as shown below....
To select track No. 23 : +10
X 2, 3
To select track No. 40 : +10
X 4, 0
Various CD (CD-DA, VIDEO CD and MP3 file) playback features
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
1
2
3
Program position of the track
to be selected next.
(To select more than one track, repeat steps 1 and
2 for each track.)
÷ Tracks will be played in the order they were programed
(following the program numbers).
÷ When the 4 / ¢ key is pressed during play, the pro-
gram will jump to the preceding or the following track
respectively.
Press in stop mode
Selection of tracks
Symbols CD-DA VIDEO CD MP3 file in the text indicate the disc media that can be played back.
A non-finalized CD-R or CD-RW cannot be played back.
0
8
5
2
9
6
3
7
4
1
10
PGM
SET
CD
SELECT
Listening to the desired sequence
(PGM )
CD-DA
VIDEO CD (with PBC OFF *)
MP3 file
5281/29-32/EN 6/13/02, 5:25 PM29