Filter
Top Products
Basic use method
17
EN
Muting the sound temporarily
÷ Press again to resume the original volume.
÷ This is also canceled when the volume is changed.
Enhancement of bass
Each press switches the modes as follows.
1 "EX.BASS" lights.
The low frequencies are enhanced regard-
less of the current volume level.
2 "LOUD" (Loudness) lights.
The low frequencies are enhanced according
to the current volume level. (Effective during
low-volume listening.)
3 Both indicators off.
Canceled.
÷ Headphone with a stereo mini plug can be con-
nected.
÷ The sound from all speakers are cut off.
Listening through headphone
Insert the headphone plug into the headphone jack.
The lowest and highest frequency bands can be
adjusted independently.
Tone adjustment
÷ The levels of both "BASS" and "TREBLE" can be ad-
justed in 2 steps in the range between – 8 and +8.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit. Sound enhancement mode is can-
celed when the indicator turns off.
(To adjust the other frequency band, repeat steps
1 and 2 for it.)
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit. Sound enhancement mode is can-
celed when the indicator turns off.
1 Select the frequency band.
2 Adjust.
Each press switches the operation.
1 "BASS" (low frequency) adjustment
2 "TREBLE" (high frequency) adjust-
ment
3 Normal mode
(Go to step 2 within 8 seconds.)
Remote control unit only
Remote control unit only
SOUND
MUTE
P
R
E
V
.
N
E
X
T
P.CALLP.CALL
TONE
5281/16-20/EN 6/20/02, 3:45 PM17