Filter
Top Products
Basic use method
18
EN
1. Load a disc.
1 Press the ) key to open the CD tray.
2 Place a disc.
3 Press the ) key to close the CD tray.
2. Start playback.
÷ After a few seconds, play
starts from track No.1.
Track No. being played
Elapsed time of track being played
This section describes you how to play CD-DA and the audio of VIDEO CD from the first track and MP3 file
of the order in which it was written.
For details on VIDEO CD menu playback, see "Playback of VIDEO CD". °~e
For details on selecting MP3 file playback, see "Playback of MP3 file". fl~‡
When a disc is placed into the CD player in advance, the unit will be switched on automatically by pressing
the CD 6 key, and playback will start.
Skipping
tracks
Playback from
desired track
Skipping tracks
To stop playback
To stop playback
Start playback/ To pause playback
AUTO PBC
(Auto playback
Control)
÷
Do not touch the played side of disc.
÷
Be sure to place a disc horizontally. Placing it
with an inclination will result in malfunction.
÷
This unit may not be able to playback certain
CD-R and CD-RW discs depending on the
recording equipment or discs. See "Notes
on playback of CD-R and CD-RW".
)
For a VIDEO CD with PBC, check that the "PBC" indicator is not lit.
If the "PBC" indicator is lit, select "PBC OFF" as follows:
1 Keep the 7 key depressed for more than 2 seconds.
2 Press the AUTO PBC key so that the "PBC" indicator goes off.
3 Press the CD 6 key to start playback.
For a disc other than VIDEO CDs with PBC, "PBC OFF" is automatically selected.
Time display
To fast forward
and backward
Play display
Playback of CD-DA, MP3 file and the audio of VIDEO CD
A non-finalized CD-R, CD-RW and
MP3 files cannot be played back.
The label side
facing up.
When playing a MP3 file, press
the CD 6 key repeatedly until
"3" (play indicator) is displayed.
5281/16-20/EN 6/20/02, 3:45 PM18