63
In case of difficulty
Knowledge sections
Maintenance
Reference
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a
soft, dry cloth. Do not use thinner, benzine, alcohol, etc.
for these agents may cause discoloration.
Do not use contact cleaners because it could cause
a malfunction. Be specially careful not to use con-
tact cleaners containing oil, for they may deform the
plastic component.
In regard to contact cleaner
Condensation (of dew) may occur inside the unit when
there is a great difference in temperature between this
unit and the outside.
This unit may not function properly if condensation oc-
curs. In this case, leave the unit for a few hours and re-
start the operation after the condensation has dried up.
Be specially cautious against condensation in the fol-
lowing circumstances:
When this unit is carried from one place to another
across a large difference in temperature, when the hu-
midity in the room where this unit is installed in-
creases, etc.
Caution on condensation Memory backup function
Stored contents which are cleared immediately when
power plug is unplugged from power outlet
Clock display
Stored contents which are cleared in at least a day after
power plug is unplugged from power outlet :
Amplifier section
"on/standby" status (ON or STANDBY), Input selec-
tion, Volume control value, Tone control levels, AUX
input level, Setting auto power save, Setting dimmer
Tuner section
Receiving band, Frequency, Preset stations, Auto/
mono setting, Timer setting contents
1 Remove the DVD (MP3, VCD, CD) from the
unit.
2 Press the DVD/CD 6 key.
3 Wait for some time and verify that the dis-
play becomes as shown in the figure.
4 Wait a few seconds and turn the unit OFF.
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
NO DISC
Important Items