Filter
Top Products
13
Controls and indicators
Preparation section
STOP7/TUNING MODE key
When power is OFF (standby):
Press to display the time of the day for 5 seconds.&
During DVD (VCD, MP3, CD) playback :
Press to stop playback.
During tuner reception:
Press to switch the tuning mode of the tuner.
6 AUX key
Press when playing or recording the input source
connected to the AUDIO CD-R IN (AUDIO AUX IN)
(analog) input jacks. U
SOUND key
Press to adjust the tone. £
MODE key
Press to switch the function of the VOLUME/MULTI
CONTROL knob to the menu select mode. #
This key is also used when setting the time of the day.
&
SET/DEMO key
Press to set or enter an item selected with the
VOLUME/MULTI CONTROL knob. &
This key is also used for switching demonstration
on/off. 4
1 Press the MODE key.
2 Select the item to be set.
3 Press the SET/ DEMO key.
Operation in menu mode
Each turn changes the displayed item.
"TIMER SET" OP
"A.P.S." ^
"SW LEVEL" £
"INPUT LEVEL" U
(Only when the AUX input is selected)
"BALANCE" £
"TIME ADJUST" &
"AUTO MEMORY" or "AUTO PRESET" ¤
(Only when the TUNER input is selected)
"DIMMER" ^
MODE
VOLUME/
MULTI CONTROL
SET/DEMO
REPEAT key
Press for repeat playback of a DVD (VCD, CD, MP3).
R
RANDOM key
Press to play the tracks in a CD (VCD) in a random
oder. Y
7 DVD/CD tray
8 PHONES jack
Plug headphones with a stereo mini-plug (optional).
0
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory.
This is called standby mode. Under the condition, the system can be turned ON by the remote control
unit.
÷ Open the door to use 6 and 8.
Lower this part to open the door.