Filter
Top Products
Preparation section
HM-381MD (En)
9
Safety tab (accidental erasure prevention tab)
After an important recording has been finished, break the
safety tab, to prevent the recorded contents from being
erased or recorded on accidentally.
For B side
For A side
To store cassette tapes
Do not store the tapes in a place which is subject to
direct sunlight, or near equipment that generates heat.
Keep the cassette tapes away from any magnetic field.
To re-record
Apply tape only to the position where
the tab has been removed.
When there is slack in the tape
In such a case, insert a pencil into the reel hole and wind
the reel hub to remove the slack.
N
S
1.Longer tape than 110 minutes cassette tape
Since longer tape than 110 minutes cassette tape is very thin, the tape could adhere to the pinch roller or be
easily broken. It is recommended that these tapes not be used with this unit to prevent possible damage.
2.Endless tapes
Do not use an endless tape, as this could damage the mechanism of the unit.
Notes
Notes
Notes on cassette tape
Copy using
analog input
Copy using
analog input
Digital copy cannot
be repeated.
Copy using
digital input
Copy using
digital input
Copy using
analog input
Copy using
digital input
Copy using
digital input
Digital recording and SCMS
Designed for copyright protection,
the SCMS is a prescription that
copying of digital signals as they
are in the digital form between
digital audio equipment is allow-
able only for one generation.
Digital recording is not available with
commercially marketed music soft-
ware (CD, MD, etc.) containing the
copy prohibit code.
Before applying power