Filter
Top Products
HM-381MD (En)
48
Application section
Convenient Recording Methods
Program recording
(MD
=
TAPE)
Desired MD tracks can be programmed in the desired sequence and recorded onto a tape.
Recording preparation is required.
¤ (Be sure to put the cassette deck in stop mode.)
1
4
3
2
MD
=
TAPE
Perform steps1 and 2 of the procedure in ”Lis-
tening in the desired sequence (Program play-
back)”.
‡
Program the desired sequence of MD tracks.
Put the MD recorder in pause mode before starting program playback.
Put the tape deck in record-pause mode.
Start recording.
To interrupt a recording
(Recording and playback will be
stopped.)
At the end of the recording
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec. has
been produced.
÷ When the PGM key is pressed to cancel the edited
contents, the entire editing contents will be erased.
÷ Tracks programmed in excess of the tape recording time
will be cut off.
(Press twice.)
÷ Starting the MD program playback starts tape recording
by synchro recording.
(Press twice.)
MD
6
TAPE rec
MD
6
STOP
7
2
2
2
2
2
2
2
2