Kenwood HM-381MD Speaker System User Manual


 
HM-381MD (En)
31
Basic section
TRACK
EDIT
Pause the recording
The recordable time for the MD is displayed.
Lights
÷ Press the key again to resume recording. At this time,
the track number is incremented by “1”.
÷ Recording can also be started by pressing the “MD
rec” key.
In regard to track numbers at the time of recording
Press during recording.
When a part without sound continues for 2 sec. or
more during recording, the track number is automati-
cally increased by “1” when the next sound enters.
When classic music continues with low sound, the
track number may be increased by “1”. (The track
number is not increased during recording of the tape
or tuner input.)
The erroneously set track number can be erased later.
When it is desired to increase the track No. during
recording, press the TRACK EDIT key during record-
ing to record a track No. at that position.
The track numbers are used at the time of playback to
find the start of tracks, for programming, etc.
÷ With digital recording from a CD, the track number is
increased when the track changes.
NoteNote
Note
At the time of recording from a CD, the track
number may be incremented when CD playback
starts. This occurs because of a signal included in
the digital signal from the CD. Delete unwanted
track numbers under reference to “TRACK ERASE
or ALL ERASE”. O
Stop the recording
3. Start recording.
1 Press the “MD rec” key (the unit enters record-pause mode).
2 When the preparation is complete, press the “MD rec” key
again.
3 Play the music source to be recorded.
4. Remove the minidisc after the end of recording.
Always remove the minidisc after recording.
÷ For recording from a CD, read “One-touch recording”. t
“WRITING” displayed during the minidisc ejection operation indicates
that the data associated with recording or editing is being written on
the disc. Do not apply vibration or shock to the unit while this mes-
sage is displayed.
In regard to display messages
Recording is not possible when one of the following messages is displayed.
“DISC FULL” : The minidisc is full. \ Erase unrequired tracks. Oas
“PROTECTED” : The write protect tab is open. \ Close it. 8a
“PLAY ONLY” : The minidisc is only for playback. \ Insert a recordable disc. a
Let's recording
MD
6
001W R54:32•
STEREO
MD EDIT
TITLE SEARCH
FM
PM
A
M
MHz
kHz
BEST HITS O.T.E.
TUNED
RANDOM
PGM
REPEAT ALL SLEEP
A.P.S.
O.T.T. PROG.
TP
R·D·SEON EON
T.E.NR
AUTOTOTALTRACK NO.
0 018P000
1 2
TA PTY
STOP
7
MD rec
33
0
44