Filter
Top Products
Application section
HM-381MD (En)
52
3
¡1
TITLE
SEARCH
4 ¢
P.CALL
ENTER
TITLE
INPUT
SET
CLEAR
DELETE
Changing or deleting a title
1
Perform step
1
of “Assigning a title to a disc or track”.
p
2
Change or delete characters one by one.
1 Move the cursor to the de-
sired character (the character
to be changed).
2 Select the character group.
3 Select overwrite or insert
mode.
4 Select the correct character.
5 Confirm the character.
(All characters of a title can be changed by repeat-
ing steps 1 to 5.)
The input cursor can be moved with the 1, ¡
keys.
Cursor movement area Character group
Each press of the TITLE SEARCH key switches the
operation.
1 Overwrite mode : To replace characters
(The cursor “
“ becomes large.)
2 Insert mode : To insert characters before the
cursor
(The cursor “
” becomes small.)
÷ If the title to be changed is too long to be displayed on the
display section, press the
11
11
1,
¡¡
¡¡
¡ key to scroll the display
so that the characters hidden until then appear.
÷ The character at the cursor is deleted (erased) and the
following characters move up by one character each.
Titles can be erased easily by continuous pressing (or by
holding the key down for repeated input).
1 Move the cursor under the character to be
cleared.
2 Clear (delete) the character.
Execute title change or deletion.
| The title scrolls.
1 Enter the title in memory.
2 Complete the operation.
To clear (delete) a character
MD Edit Functions
DOT/CHARA.
The MD operates on the basis of the information
read from the disk into memory. Always remove the
minidisc after title input or editing.
EHWO≤M
K
OP•
STEREO
MD EDIT
TITLE SEARCH
FM
PM
A
M
MHz
kHz
BEST HITS O.T.E.
TUNED
T.E.NR
AUTOTOTALTRACK
NO
.
dISCP052
N
ISCE ST
D
RE•
STEREO
M
T
FM
PM
A
M
MHz
kHz
BEST HITS O.T.E.
TUNEDAUTOTOTALTRACK NO.
dISCP052
O
ENWOOD
K
FM
PM
A
M
TUNEDAUTOTOTALTRACK
NO
.
dISCP05
2
N