Filter
Top Products
45
Specifications
Designs & specifications are subject to change without notice.
TO BE CONTINUED ON THE NEXT PAGE
Amplifier
Output Power At Stereo operation:
Front channels: 60 W per channel, min. RMS, both channels driven
into 8 Ω at 1 kHz with no more than 0.9% total
harmonic distortion. (IEC268-3/DIN)
At Surround operation:
Front channels: 60 W per channel, min. RMS, driven into 8 Ω at
1 kHz with no more than 0.8% total harmonic
distortion.
Center channel: 60 W, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
Rear channels: 60 W per channel, min. RMS, driven into 8 Ω at
1 kHz, with no more than 0.8% total harmonic
distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz): DVD, STB, VCR, TV, TAPE: 220 mV/47 kΩ
Audio Input (DIGITAL IN)* : Coaxial: DIGITAL 1 (DVD): 0.5 V(p-p)/75 Ω
Optical: DIGITAL 2 (STB): –21 dBm to –15 dBm (660 nm ±30 nm)
*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level: VCR, TV, TAPE: 220 mV
Signal-to-Noise Ratio (’66 IHF/DIN): DVD, STB, VCR, TV, TAPE: 87 dB/62 dB
Frequency Response (8 Ω): DVD, STB, VCR, TV, TAPE: 20 Hz to 20 kHz (±1 dB)
Tone Control: Bass (100 Hz): ±10 dB
Treble (10 kHz): ±10 dB
Bass Boost: +6 dB ± 1 dB at 70 Hz
Video
Video Input Sensitivity/Impedance (1 kHz):
Composite video: DVD, STB, VCR, TV: 1 V(p-p)/75 Ω
S-VIDEO: DVD, STB, VCR: (Y:luminance): 1 V(p-p)/75 Ω
(C:chrominance): 0.286 V(p-p)/75 Ω
RGB: DVD, STB, VCR: 0.7 V(p-p)/75 Ω
Video Output Level/Impedance (1 kHz):
Composite video: VCR, TV: 1 V(p-p)/75 Ω
S-VIDEO: TV: (Y:luminance): 1 V(p-p)/75 Ω
(C:chrominance): 0.286 V(p-p)/75 Ω
RGB: TV: 0.7 V(p-p)/75 Ω
Signal-to-Noise Ratio (S/N): 45 dB
Synchronize: Negative
Troubleshooting / Specifications
EN38-46.RX-E111&112RSL[B]_f 02.1.22, 8:55 AM45