Filter
Top Products
41
❏ Changing the transmittable signals for operating an
STB
1
Press and hold STB .
2
Press STB.
3
Enter manufacturer’s code using buttons 1 – 9, and 0.
4
Release STB .
Now, you can perform the following operations on the STB.
STB : Turn on or off the STB.
CHANNEL +/– : Change the channels.
1 – 10, 0, +10 (+100) : Select the channels.
Note:
Refer also to the manual supplied with your STB.
5
Try to operate your STB by pressing STB .
When your STB turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of STB,
try each one until the correct one is entered.
Mastering Remote Operations
■ Operating other Manufacturers’
Equipment
By changing the transmittable signals, you can use the
remote control supplied for this unit to operate other
manufacturers’ equipment.
• Refer also to the manuals supplied for the other products.
• To operate those components with the remote control, first
you need to set the manufacturers’ codes each for DVD
player, STB, VCR, and TV.
• After replacing batteries of the remote control, set the
manufacturers’ codes again.
❏ Changing the transmittable signals for operating a
DVD player
1
Press and hold DVD .
2
Press DVD.
3
Enter manufacturer’s code using buttons 1 – 9, and 0.
4
Release DVD .
Now, you can perform the following operations on the DVD
player.
DVD : Turn on or off the DVD player.
PLAY : Start playback.
STOP : Stop playback.
PAUSE : Pause playback. To release it, press PLAY.
¢ : Skip to the beginning of the next chapter.
4 : Return to the beginning of the current
(or previous) chapter.
Note:
Refer also to the manual supplied with your DVD player.
After pressing DVD MENU with the RDS/DVD MENU
selector set to “DVD MENU,” these buttons can be used
for the DVD menu operations.
Note:
For detailed menu operations, refer to the
instructions supplied with the discs or the DVD
player.
5
Try to operate your DVD player by pressing
DVD
.
When your DVD player turns on or off, you have entered the
correct code.
DISPLAY MODE
TA/NEWS/INFO
PTY( PTY9
RDS
DVD
MENU
PTY SEARCH
DVD MENU
ENTER
Manufacturer Codes
JVC 01
Panasonic 02
Philips 07
Pioneer 03
Sony 05
Toshiba 04
Yamaha 06
Manufacturers’ codes for DVD player
Manufacturer Codes
JVC 01, 02
Amstrad 03 – 06, 33
BT 01
Canal Stellite 22
Canal + 22
D – Box 26
Echostar 19 – 21, 23
Finlux 11
Force 30
Galaxis 29
Grundig 07, 08
Hirschmann 07, 19, 39
ITT Nokia 11
Jerrold 16
Kathrein 13, 14, 36
Luxor 11
Mascom 34
Maspro 13
Nokia 26, 28, 35
Pace 10, 27, 33
Panasonic 15
Philips 09, 25
RFT 12
Saba 37
Sagem 24, 31
Salora 11
Selector 31
Skymaster 12, 38
Thomson 37
TPS 24
Triax 32
Videoway 17, 18
Wisi 07
Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
Manufacturers’ codes for STB
EN38-46.RX-E111&112RSL[B]_f 02.1.17, 9:21 AM41