Filter
Top Products
58
Setting the Timer
To turn a timer o or on
When the system is turned on, press the [TIMER] key.
n
l
Press the power [ ] key to turn the power OFF.
The [STANDBY/TIMER] indicator on the main unit lights orange.
If the indicator lights red, set the clock to the correct time.
l
l
1212
The setting changes each time you press the [TIMER] key.
PROG. 1 on PROG. 2 on
PROG. 1 and 2 onTimer off
1 lit 2 lit
1 2 unlit 1 2 lit
The [STANDBY/TIMER] indicator will light red if there was
a power failure or the system was unplugged from the wall
outlet for some time. If this happens, set the system clock
to the correct time again. (P.60)
l
To modify the program settings, reconfigure the timer settings from
the beginning or press [
C
] to go back to the previous setting.
When the system is in Standby mode, you can confirm the timer
setting (on or off) for 5 seconds by pressing the [
F
] key on the remote
control.
l
l
UX-J51_EN.indb 58UX-J51_EN.indb 58 10.8.19 2:51:10 PM10.8.19 2:51:10 PM