Filter
Top Products
88
99
Press the [ENTER] key.
If you set a level other than 0, the “TONE” is displayed.
l
1010
77
Press the [TONE] key.
Press the [
C
] or [
D
]
key
to select the frequency (Low:
5kHz, Mid: 7kHz, or High: 10kHz) of the high-range
tones (TREBLE).
Press the [
A
] or [
B
] key to adjust the high tones
(TREBLE) level.
The “TONE” ashes while
setting is in progress. While
the “TONE” is ashing, you
can adjust the level in a
range from -8 to +8.
l
If you do not need to adjust all the range levels, press the
[ENTER] key to end the settings after you have nished the
range level adjustments you want to make.
l
Digital Signal ProcessorDigital Signal Processor
50
UX-J51_EN.indb 50UX-J51_EN.indb 50 10.8.19 2:51:06 PM10.8.19 2:51:06 PM