Filter
Top Products
67
On
Standby
Cable Mode
CH
VOL
Muting
Enter
On
Standby
SAT/MD Mode
CH
ENTER,
VOL
Muting
Menu
Enter
Operating your programmed remote controller
Numeric keys
Numeric keys
After entering a pre-programming by following the procedure
given above, the following modes become enabled for use.
DVD Mode (DVD Player Mode)
Operations are the same as explained on page 62.
SAT Mode (Satellite Tuner Mode)
1. Press the SAT/MD Mode button.
The SAT/MD Mode button lights.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your satellite tuner unit.
The buttons given below have operations programmed
into them.
On: Turns on and off satellite tuner unit (same as Standby button on
the remote controller)
CH : Changes selected preset channel
: Moves cursor
ENTER: Confirms selection
Menu: Displays menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
: Adjusts the volume at the DTR-7.3
Muting: Activates the muting function at the DTR-7.3
Cable Mode (Cable Mode)
1. Press the Cable Mode button.
The CABLE button lights.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your cable TV unit.
The buttons given below have operations programmed
into them.
On: Turns on and off cable TV unit (same as Standby button on the
remote controller)
CH
: Changes selected preset channel
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL : Adjusts the volume at the DTR-7.3
Muting: Activates the muting function at the DTR-7.3