Filter
Top Products
48
2-3. Video Setup Sub-menu
a. Video
This setting allows you to match the audio from one component with
the video from another. Therefore, you can set a video source to be
displayed while the audio from another input source is heard. For
example, this allows you to play the music from a compact disc,
while displaying the picture from a video cassette player or other
video source.
The default settings are given below.
Input source selected Video
CD Last Valid
PHONO Last Valid
TUNER Last Valid
TAPE Last Valid
DVD DVD
VIDEO 1 VIDEO 1
VIDEO 2 VIDEO 2
VIDEO 3 VIDEO 3
VIDEO 4 VIDEO 4
VIDEO 5 VIDEO 5
NETAUDIO Last Valid
Last Valid: Select to have the video of the previous input source
continued. For example, if the selected input source is VIDEO 1,
and you then change to CD (set to “Last Valid”), then the audio
from the CD input is played while the video from VIDEO 1
continues.
Advanced Menu
2.Input Setup
2-3.Video Setup
a.Video
:DVD
b.Component Video
:INPUT1
Quit:|SETUP|
Input:DVD
Input:DVD
b. Component Video
If the video signal from a component is input to one of the
COMPONENT VIDEO input banks (1 or 2), then which input
source and which component video input bank must be set here.
The default settings are given below.
Input source selected Component video input
CD Last Valid
PHONO Last Valid
TUNER Last Valid
TAPE Last Valid
DVD INPUT 1
VIDEO 1 INPUT 2
VIDEO 2 INPUT 2
VIDEO 3 INPUT 2
VIDEO 4 INPUT 2
VIDEO 5 INPUT 2
NETAUDIO Last Valid
Last Valid (enables the source last selected): Select to have
the video of the previous input source continued.
Input Setup