Filter
Top Products
62
DVD Mode
Setup
On
Standby
Top Menu
Disc
ENTER,
Return
Audio Sel
Angle
VOL
Muting
Menu
Subtitle
Search
Using remote controller
Controlling an Integra/Onkyo DVD player
The connector of the Integra/Onkyo DVD player must be
connected to the DTR-7.3 (see page 26).
1. Press the DVD Mode button.
The DVD Mode button lights.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Integra/Onkyo DVD
player.
Operation buttons:
On: Turns DVD player on and off
Standby: Turns DVD player off (Some sets may not respond to this
button. In this case, use the ON button to put the DVD player in the
standby state.)
Setup: Displays the OSD of the DVD player
: Moves cursor in the OSD Menu of the DVD player
ENTER: Enter button for the OSD Menu of the DVD player
Return: Return button for the OSD Menu of the DVD player
Top Menu or Menu: Displays menu screens recorded on DVD
media
Disc
: Selects disc in DVD changer
Audio Sel: Selects audio or language track (if recorded on the DVD)
Angle: Selects a camera angle (if recorded on the DVD)
Subtitle: Selects subtitle language (if recorded on the DVD)
Search: Searches for location on disc to start playback
Random: Random playback
: Chapter/Track down
: Chapter/Track up
: Play
: Stop
: Fast reverse
: Fast forward
: Pause
: Opens/closes the disc tray
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
VOL : Adjusts volume at DTR-7.3
Muting: Activates muting function at DTR-7.3
Note:
When operating an Integra/Onkyo DVD player directly with the
remote controller without connecting the
terminals, pre-
programming is necessary (see page 65).
DVD
operation
buttons
Numeric keys