Filter
Top Products
54
Insignia NS-H4005 Home Theater System
www.insignia-products.com
The playback picture is
poor.
The disc is dirty. Clean the disc.
VCR video heads are
dirty.
Clean the video heads.
The videotape is a rental
or was recorded on
another VCR.
Adjust the tracking.
Your home theater
system does not start
playback.
No disc or videotape is
inserted.
Insert a disc or videotape.
The disc or videotape
indicator lights in the
display window.
An unplayable disc is
inserted.
Insert a playable disc.
(Check the disc type,
color system, and
regional code.)
The disc is placed upside
down.
Place the disc with the
label facing up.
The disc is not placed
within the guide.
Make sure that the disc is
placed correctly inside
the guide on the disc tray.
The disc is dirty. Clean the disc.
The remote control does
not work correctly.
The remote control is not
pointed at the remote
sensor on your home
theater system.
Point the remote control
at the remote sensor of
your home theater
system.
The remote control is too
far from your home
theater system.
Operate the remote
control within 23 ft. (7 m).
There is an obstacle
between the remote
control and the remote
control sensor.
Remove the obstacle.
The batteries in the
remote control are
exhausted.
Replace the batteries.
Your home theater
system is in the wrong
mode.
If you are playing a
videotape, press VCR.
If you are playing a disc,
press DVD/CD.
Camcorder image does
not appear on the TV
screen
The wrong video input
source is selected.
If the camcorder is
connected to the back
A/V jacks, select LINE 1.
If the camcorder is
connected to the front
A/V jacks, select LINE 2.
Symptom Cause Solution