23
Insignia NS-H4005 Home Theater System
www.insignia-products.com
• To play the videotape in slow motion, freeze the image, then
press FORWARD . The videotape plays 1/19 slower than
normal playback. Press PLAY to resume normal playback.
• To skip forward 30 seconds on the videotape, press CM SKIP.
(This feature is useful when you want to skip commercials or
short program segments.) Each time you press CM SKIP, the
tape skip forward 30 seconds. You can skip forward a
maximum of three minutes. When the skip is complete, your
home theater system resumes normal playback.
Adjusting the tracking
The tracking function adjusts the picture to remove snow or streaks.
Your home theater system automatically adjusts tracking when:
• A tape is played for the first time.
• Tape speed (SP or SLP) changes.
• Streaks or snow appear because of scratches on the tape.
If the automatic tracking feature does not get rid of “noise,” you can
manually adjust the tracking.
To manually adjust the tracking:
• Press TRK/PRESET or TRK/PRESET on the remote
control until the noise on the screen is reduced.
Note
If you experience “noise” while playing a videotape in slow
motion, press or to adjust the picture.
If the VCR is in slow motion mode for more than three
minutes, your home theater system starts normal playback
to protect the videotape and video heads.
Note
If a vertical “jitter” appears on the screen, adjust the tracking
slowly.
Tracking is reset to normal when a videotape is ejected or
the power cord is unplugged for more than three seconds.