Filter
Top Products
30
Insignia NS-H4005 Home Theater System
www.insignia-products.com
4 Press REC/ITR . The VCR starts copying the DVD, and COPY
appears in the display window.
5 When the copying is complete, press STOP or POWER twice.
Using the DVD player
Playing a DVD
To play a DVD:
1 Make sure that the power cord is plugged into a power outlet.
2 Press CD/DVD on the remote control or DVD/VCR on the front of
your home theater system to select DVD mode. READING
appears in the display window, and the DVD image appears on
the TV screen.
3 Press AUDIO to select the audio mode.
4 Press OPEN/CLOSE to open the disc tray, insert a DVD into
the tray, then press OPEN/CLOSE to close the tray.
5 If playback does not start immediately, press PLAY .
6 If a DVD menu opens, press , , , or to select the option
you want, then press MEMORY/ENTER.
Note
You must manually stop the recording, or your DVD/VCR
may replay and record over and over.
If you stop DVD playback during the recording, VCR
recording also stops.
Note
A DVD may have a regional code. The regional code for
your home theater system is 1. If the regional code for the
DVD does not match the regional code for your home
theater system, you cannot play the DVD.
If you have blocked movie ratings with the parental controls
and the rating for the DVD is blocked, you must enter the
four-digit password to unblock and watch the DVD.