Filter
Top Products
Basic Operation
22
CDR-882 User Manual Version 1.0www.hhb.co.uk
Selecting an input
The CDR-882 is equipped with five stereo audio inputs, in
various formats. Only one may be active at any one time, and
provides the real-time recording or monitor source. In the case
of DualBurn Record Mode (see page 39), the selected input is
the source for both drives.
The currently selected input is indicated at the top left of the
display at all times. The I/P SELECT button determines which
input is to be used; pressing it scrolls through the five options in
sequence, which are:
INPUT DISPLAY
Balanced analogue (XLRs)
Balanced
Unbalanced analogue (phonos)
Unbal
AES/EBU digital
AES/EBU
S/PDIF (phonos)
Coax
S/PDIF (TOSlink)
Optical
See page 10 for details of the various rear panel connectors,
pinouts and details of the inputs’ capabilities.
Note that changing from one digital input type to another may
require the selection to be confirmed with the ENTER button,
which may affect the Clock Source. See page 38 for further
details.
Time displays
The track or disc time information shown on the front panel
display is determined both by the drive’s current status and the
selected DISPLAY option.
When a disc is first loaded, the time display shows
the total time of all the tracks on the disc (once disc
initialisation is complete) – TOTAL
When a disc has been cued to the start of a track (i.e.
with the AMS knob), but is waiting in STOP or PAUSE
modes, the duration of that track is displayed – TRACK
While a track is playing, any of the four options listed
below may be selected with the DISPLAY button
Pressing the DISPLAY button In PLAY mode scrolls through the
options, which are (in sequence):
INPUT DISPLAY
Elapsed time – track (+ track number)
TRACK
Elapsed time – whole disc
TOTAL
Remaining time – track (+ track number)
REMAIN
Remaining time – whole disc
TOTREM
Note (1): The DISPLAY button only alters the time display option
for the drive currently selected by the DRIVE SELECT button
(28).
Note (2): If PROGRAM PLAY mode is selected (see page 44),
the times displayed in TOTAL and TOTREM modes are those for
the programmed playlist, not the total of the disc.
The display indicates which method is currently selected (for
each drive) to the right of the time display itself.
If a disc containing CD Text data is loaded, the display will
automatically show the CD Text. Track number and time
information may be displayed instead by pressing DISPLAY.
•
•
•