Filter
Top Products
19
Setting the Interfaces
Setting Extended Jitter Receive Interface
Setting Extended Jitter Receive
Interface
Description: Extended Jitter measurements are made in a jitter bandwidth of 0.1 Hz
to 25 kHz. These measurements are made at the upper end of the
standard wander frequency range and the lower end of the standard
jitter frequency range. The extended jitter receive interface is selected
with or
MEASUREMENT TYPE .
The choices made on the jitter receive interface determine the threshold
level for determining a jitter hit. The measurement Range and the
Filters are not selectable.
HOW TO: 1 Choose MEASUREMENT TYPE .
2 Choose the HIT THRESHOLD level - if the received jitter exceeds the
value chosen a jitter hit is recorded.
RECEIVE
PDH/DSn JITTER
RECEIVE
SONET
JITTER
EXTENDED
EXTENDED