Filter
Top Products
7
Setting the Interfaces
Setting Jitter Transmit Interface
Setting Jitter Transmit Interface
Description: You can add jitter to the transmitted DSn or SONET signal at 2 Mb/s,
34 Mb/s, STS-3, OC-3, OC-12, and OC-48. You can source the jitter
modulation internally or from an external source.
HOW TO: 1 If you are adding jitter to the DSn signal, set up the DSn transmit
interface. See Chapter “Setting DSn Transmit Interface”.
2 If you are adding jitter to the SONET signal, set up the SONET
transmit interface. See “Setting SONET Transmit Interface” page 4.
3 Choose JITTER/WANDER .
If you wish to add wander to the DSn or SONET signal, See “Setting
Wander Transmit Interface” page 9.
4 Choose JITTER .
If you wish to perform a Jitter Tolerance measurement, choose
. See “Measuring Jitter Tolerance” page 89.
If you wish to perform a Jitter Transfer measurement choose
. See “Measuring Jitter Transfer” page 92.
JITTER
ON
AUTO TOLERANCE
TRANSFER FUNCTION