Filter
Top Products
BDS
16
Connections
Connecting the Subwoofer (all systems)
Use the supplied mono RCA audio cable (purple connectors) to connect the subwoofer’s Line-
Level LFE In connector to the BDS receiver’s Subwoofer output.
BDS Receiver (BDS 2 shown)
Subwoofer
Mono RCA Cable (included)
To Subwoofer
Output
To Line Level LFE In
IMPORTANT: Do not plug the subwoofer’s AC power cord into an AC outlet at this
time.
Connecting the Radio Antenna
Connect the supplied antenna to the Radio Antenna connection, as shown in the illustration
below. Fully extend the antenna wire and move it to different positions until you get the best
reception of your favorite stations.
Connecting a TV or Video Display
Use the supplied HDMI cable to connect the BDS receiver’s HDMI output to your TV/video
display’s HDMI input. The BDS receiver is HDMI version 1.3a.
TV
NOTE: The HDMI connection will deliver both video and audio to your TV or video display. We
suggest disabling your TV or video display’s audio system to take full advantage of your BDS
system’s superior audio reproduction.