Harman-Kardon 950-0321-001 Home Theater System User Manual


 
BDS
20
Setting Up the Receiver
Settings Menus
Pressing the remote’s Settings button displays the receiver’s settings menus, which allow you
to configure the receiver’s various functions. Use the remote’s Cursor Left/Right buttons to
change from one menu to another, use the Cursor Up/Down buttons to navigate through the
lists that appear on the various screens, and use the OK button to select highlighted items.
Press the Exit button at any time to return to the previous screen.
Select to adjust general settings
System
Language
Playback
Parental Control
Network
General Settings
General Settings
Select to adjust system settings
System
Language
Playback
Parental Control
Network
Front Panel Brightness
Screen Saver
Auto Power Off
System Upgrade
Setup Wizard
100%
Off
Off
More...
General Settings
System: The System option allows you to set the following system features:
Front Panel Brightness: This option sets the brightness of the BDS receiver’s information
display.
Screen Saver: To prevent image burn-in, we recommended activating the Screen Saver
when using the BDS receiver with a CRT or plasma TV.
Auto Power Off: This option sets the amount of time the BDS receiver remains on while
idle until it automatically enters the Standby mode.
System Upgrade: Select this option when you want to install a BDS firmware upgrade for
your BDS receiver that you’ve downloaded from a harman kardon Web site or other harman
kardon source.
Setup Wizard: This option activates the receiver’s Setup Wizard (see Setup Wizard, on page
19).
BD-Live Storage: This option lets you set up how the BDS receiver will handle stored
BD-Live content. You can choose to store the content either in the receiver’s internal memory
or on a USB memory device via the receiver’s USB port. See BD-Live Interactivity, on page 26,
for details.
Restore Defaults: This option restores the receiver to its factory-default setting values.
Note: This procedure deletes all preset FM stations and restores the parental-control
password back to the factory default of 0000.
Language: This setting lets you set the language for the disc player and the disc menus, the
preferred audio language and the preferred subtitle language.
NOTE: If the selected language is not available on the particular disc being played, use the
disc’s menu to set the language from those available on the disc.
Playback: The Playback option allows you to set the following disc playback features:
Show Angle Icon
t
: This option lets you select whether or not the angle icon will
automatically be displayed when a disc with multiple camera angles is played.
Auto Play
t
: This option lets you select whether discs will automatically begin playing
when they are loaded into the BDS receiver’s disc player.
Show PIP Icon
t
: This option lets you select whether or not the picture-in-picture (PIP)
icon will automatically be displayed when a Blu-ray Disc recording with PIP content is
played.
Show Secondary Audio Icon
t
: This option lets you select whether or not the
Secondary Audio Icon will automatically be displayed when a Blu-ray Disc recording with
secondary audio content is played.
Disc Resume
t
: This option lets you select whether or not a disc that has been ejected
while playing will resume play from that location when it is re-inserted into the receiver’s
disc player.
DivX® VOD DRM
t
: This option displays your receiver’s DivX registration information.
Parental Control: This option lets you set the receiver’s parental-control password and the
level of parental control you want active. NOTE: The default password is 0000.
Network: This option allows you to set the following network features:
Information
t
: This option displays your network’s IP, subnet mask, gateway and DNS
addresses.
Test Connection
t
: This option tests for a proper network connection to the BDS receiver.
IP Configuration
t
: This option lets you enter your network settings, either
automatically or manually. Unless your network administrator instructs you otherwise,
you should use the Auto option.
BD-Live Connection
t
: This option lets you set the receiver’s BD-Live connection
preferences. “Always Allow” allows downloading of BD-Live content whenever a disc with
BD-Live content is played. “Limit” allows downloading only if the disc is officially BD-Live
certified. “Prohibited” does not allow any BD-Live access.
Proxy Setting
t
: “Enabled” allows you to select and set the Proxy Host and Proxy Port if
your network requires a proxy setting. “Disabled” bypasses any Proxy Host and Proxy Port
settings and prevents their selection. This option is for advanced users only and in most
cases should be left set to “Disabled.”