Filter
Top Products
FIRMWARE E SOFTWARE UPGRADES ENG
Page 71
K) Make sure the Identification is correctly done
(Ready to start Firmware Upgrade message + firmware code
displayed in the right field), and click ‘Program’ button. The upgrade will continue automatically.
L) Once you have completed the upgrade procedure, shut off
the equipment.
M) Move the jumper JP1 back to the previous position
N) Turn the processor back on.
20.2 PC SOFTWARE UPGRADE
It is recommended to completely uninstall the existing version before running the new one.
To uninstall the exisiting version
, proceed as follows:
- enter the Windows «Control Panel»
- click on the « Install Applications » icon
- choose the item of current version from the list and select it
- click on the «Add/Remove» button
- confirm deletion of all proposed files
Access the PC Software folder
Run the Setup.exe file of the new Remote Control program