Filter
Top Products
FM VERSION DESCRIPTION ENG
Page 24
11.11 THE MENU TREE
The menu tree for the Falcon 15 MPX Version is shown on here below. It has all of the possible main menu
items listed along the left side.
The branching sub-menus and parameters are connected in the order they are encountered in the menu system.
The diagram here below displays the complete
Falcon 15 menu – please refer to the table on Cap. 2 for Optional
feature list.
|--
MAIN PAGE (Preset, Agc level, Compressor levels, Input Meters)
|--
Input Setup
-- |--
Sensibilty
--
- 12 dBm to+ 12 dBm (1 dB step)
|--
AGC Speed
--
0 to 6 dB/sec (0.2 dB step)
|--
AGC Mode
--
Hold=0 sec & MaxG= 08 dB;
--
Hold=1 sec & MaxG= 10 dB;
--
Hold=0 sec & MaxG= 12 dB;
--
Hold=2 sec & MaxG= 12 dB;
--
Hold=3 sec & MaxG= 15 dB;
--
Hold=3 sec & MaxG= 20 dB;
--
Hold=0 sec & MaxG= 15 dB;
--
Hold=0 sec & MaxG= 20 dB;
|--
Input Source
--
Analogic / Digital input
|--
Mpx Module Setup
-- |--
Pilot Level
--
Off / - 25 dB to – 15.5 dB (0.1 dB step)
|--
Pilot Phase
--
- 12 Deg to + 12 Deg (1 Deg step)
|--
Preemphasis
--
50 uSec / 75 uSec (Internal)
|--
Output (Mpx) Level
--
- 9.0 dB to + 15 dB (0.1 dB step)
|--
Output Mode
--
Normal / Peak Ref Tone / Split mode / Bypass
|--
Mpx mode
--
Normal (Stereo) / Mono (Left Input) / Mono (L+R)
|--
Output Sync
--
Output Sync Disabled / Enabled
|--
Noise Gate
--
Off, - 80 dB to – 51 dB (1 dB step)
|--
Rds Setup
-- |--
Rds Encoder
--
Rds Encoder Off / Rds Encoder On
|--
Rds Level
- 44.0 dB to – 20.0 dB (0.1 dB step)
|--
Rds On Split
--
Rds Encoder Off / Rds Encoder On
|--
Serials Setup
-- |--
Serial Port 1
--
Serial Disabled / Serial Enabled
|--
Serial Port 2
--
Serial Disabled / Serial Enabled
|--
System Information
-- |--
Temperature
|--
External Inputs
--
Bit M/S On (1) / Off (0); bit TA On (1) / Off (0); Split On
(1) / Off (0)
|--
Firmware Version
|--
Firmware Code